The best of the milk pasteurizer, homogenizer and milk filling machine

This small ultrasonic cleaner applicated in gold and silver jewelry, watches, eyeglasses, contact lens accessories, glass, hair comb, tableware, baby bottles, printing nozzle, toothbrush, dentures, dental equipment, medical equipment, electronic products, automobile parts, laboratory supplies, computer motherboard and accessories, circuit boards, etc.

Note:
1, ultrasonic normal operation, should hear the ultrasonic and tank resonant uniform sound, and cleaning fluid
There is no agitation on the surface, only ripples caused by cavity blasting. If there is intermittent oscillation, please add less
Allow cleaning fluid or discharge a little cleaning fluid, eliminate oscillation is conducive to cleaning objects;
2. Under the premise of ensuring the cleanliness of cleaning objects, work intermittently and without heating as far as possible, because heating and long time ultrasonic work will increase the temperature in the case, which is easy to accelerate the aging of electronic devices;
3. Flammable and corrosive cleaners must not be used;
4. When there is no proper amount of cleaning liquid in the cleaning tank, heating and ultrasonic wave must not be turned on;
5. Prevent the cleaning liquid and water from entering the chassis and soaking the circuit board and vibration, which will burn the electronic components;
6. If any foreign body falls into the bottom of the tank, it should be taken out immediately (do not take it directly by hand to prevent injury);
7. When changing liquid or draining liquid, it should be carried out under normal temperature in the tank, and be sure to shut down and unplug the power cord! (After cleaning, do not accumulate liquid in the cleaning tank!)
8. After the cleaning work is completed, the dirt in the tank should be cleaned and removed immediately to keep the appearance clean and dry;
9, each boot working time should not be too long, boot 15 minutes or so should stop for five minutes to heat dissipation, in order to better protect the machine, reduce the failure rate.